Top Sellers

Audi 200 S2 S4 RS2 2.2 20V Turbo FCP H-beam connecting rods 144mm

Audi S2 RS2 2.2T 20V 3B AAN FCP H-beam steel connecting rods 144mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA14450620-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)

€539.00

Audi S2 RS2 2.2T 20V 3B AAN FCP H-beam steel connecting rods 144mm 10V 46mm...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA1444920-5
Profile: H-beam
C to C: 144mm
Big end diameter: 49.00mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)

€539.00

Audi S2 RS2 2.2T 20V 3B ABY AAN Supertech valve spring set SPRK-V2093-4-20S

Spring data:
Seat pressure - 82lbs @ 31.75mm
Open (lift) pressure - 224lbs @ 11.50mm
Spring coil bind - 16.70mm
Max lift - 13.00mm
Rate - 12.50mm
Outer spring outer diameter - 30.40mm
Outer spring inner diameter - 23.20mm
Inner spring outer diameter - 21.90mm
Inner spring inner diameter - 16.50mm

Set includes:
Dual springs - 20 pcs. SPR-V2093-4
Titanium retainers - 20 pcs. RET-027
Seats - 20 pcs. SEAT-V2093

€750.00

Audi S2 RS2 2.2T 20V 3B ABY ABU AAN Ajusa MLS cylinder head gasket set 52101100

Set includes:

1 MLS cylinder head gasket (82mm x 1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
1 valve cover gasket
20 valve seals
and etc.

€159.00

Audi S2 RS2 2.2T 20V 3B ABY ABU AAN Victor Reinz head gasket kit 02-29335-01

Set includes:
1 cylinder head gasket (82.00x1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
5 exhaust manifold gaskets
1 valve cover gasket
1 seal
and etc.
Fits for:
Audi 200, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, ABU, AAN)

€299.00

Audi S2 RS2 2.2T 20V AAN ABY Kolbenschmidt thrust washer kit

Part number TW2009AM.
King Racing thrust washers kit.
90, Coupe - 2.3 20V (7A)
Quattro, 200, S2, RS2, S4, S6 - 2.2T 20V (3B, AAN, ABY, ADU, RR)

€16.00

Audi S2 RS2 2.2T 20V Athena Cooper Ring cylinder head gasket 83.5x1.6mm 330047R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330047R
Gasket thickness: 1.60mm
Bore size: 83.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€275.00

Audi S2 RS2 2.2T 20V Wossner pistons kit 82mm CR 8.0 K9201D100-5

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.0:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-12.30cm³
Compression height (CH)	33.40mm
Pin diameter	20mm
Fits for	Audi 2.2 20V (3B, ABY, AAN, ADU)

€899.00

Audi Stroker 2.5 20V turbo S2 / RS2 FCP forged piston kit

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 81.50mm CR 8.5

Part number: FCPPASTR815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must be 159mm

€989.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 81.5mm CR 9.5

Part number: FCPPASTR815095/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must be 159mm

€989.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82.50mm CR 8.5

Part number: FCPPASTR825085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must 159mm

€989.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82mm CR 8.5

Part number: FCPPASTR820085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

Connecting rod length must 159mm

€989.00

Best sellers