Top Sellers

Subaru 2.0 EJ20 Athena Cooper Ring cylinder head gasket set 93.5x1.2mm...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330130R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 93.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€279.00

Subaru BRZ / Toyota GT86 2.0 FA20 ARP cylinder head stud kit 260-4301

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€346.00

Subaru BRZ / Toyota GT86 FA20 MANLEY H-Tuff connecting rod kit 15084-4

Manley has released their H-Tuff Connecting Rods for the Subaru FA20 engine. These connecting rods were designed for elevated boost and higher power levels. These rods were created to bridge the gap between Manley's standard, proven H-Beams and top of the line Turbo Tuff® Series rods.

H-Tuff delivers a stronger rod with greater safety margin to handle elevated boost and higher power levels for a modest price premium over standard H-Beams. Manley's H-Tuff design incorporates wider beam and increased cross-sectional thickness in critical areas. These connecting rods are heat treated, stress relieved, shot peened, and 100% individually magnafluxed.

Manufactured from 4340 forgings
Weight matched sets + 1.5 grams
Center to Center: 5.090"
Big End Bore: 2.087"
Big End Width: 0.843"
Pin Diameter: 0.866"
Pin Bore: 22mm

€799.00

Subaru BRZ / Toyota GT86 FA20 Supertech valve spring kit SPRK-100-BRZ

Springs data:

Seat pressure - 85lbs @ 33.5mm
Open (lift) pressure - 212lbs @ 10mm
Spring coil bind - 18.50mm
Rate - 12.50lbs/mm
Max lift - 15.00mm
Outer spring outer diameter: 30.20mm
Outer spring inner diameter: 22.20mm
Inner spring outer diameter: 22.20mm
Inner spring inner diameter: 16.80mm

Set includes:

Dual springs: 16 pcs. SPR-100-BRZ
Titanium retainers: 16 pcs. RET-H1000-BRZ
Seats: 16 pcs. SEAT-H1002-BRZ

€630.00

Subaru BRZ FA20 / Toyota 4U-GSE ACL connecting rod bearings 4B8310H

€79.00

Subaru BRZ FA20 / Toyota 4U-GSE ACL connecting rod bearings 4B8310H-0.25

Sizes	STD, .025, .25
Oil Clearance
Half Type
Material	F781
Min. Std Shaft Size	49.976
Max. Std Shaft Size	50.000
Min. Std Tunnel Size	53.000
Max. Std Tunnel Size	53.024
Max Wall at Crown	1,504
Max Overall Length	15,6
Weight	0.133
Notes

€79.00

Subaru BRZ FA20 / Toyota 4U-GSE ACL main bearings 5M8312H

Sizes	STD, .025, .25, .50
Oil Clearance
Half Type	Identical halves
Material	F780
Min. Std Shaft Size	2.6766in /67.985mm
Max. Std Shaft Size	2.6775in /68.009mm
Min. Std Tunnel Size	2.874in /73mm
Max. Std Tunnel Size	2.8746in /73.016mm
Max Wall at Crown	0.0986in /2.505mm
Max Overall Length	0.6929in /17.6mm
Weight	0
Notes

€129.00

Subaru BRZ FA20 / Toyota 4U-GSE ACL main bearings 5M8312H-0.25

€129.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race connecting rod bearings 4B8296H-0.25

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B8296H	4B8296HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0466in / 51.984mm
Max Std Shaft Size	2.0472in / 51.000mm
Min Std Tunnel Size	2.1654in / 55.000mm
Max Std Tunnel Size	2.1661in / 55.020mm
Max Wall at Crown	0.0591in / 1.500mm	0.0585in / 1.487mm
Max Overall Length	0.6496in / 16.50mm
Notes	Suits 52mm journal only
Diagram (Top View)

Engines Subaru 4 cylinder 1.8 2.0 2.2 2.5
(EJ18, EJ20, EJ22, J25, EJ20T, EJ20TT, EJ22T, EJ25T)

€69.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race connecting rod bearings 4B8296H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B8296H	4B8296HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0466in / 51.984mm
Max Std Shaft Size	2.0472in / 51.000mm
Min Std Tunnel Size	2.1654in / 55.000mm
Max Std Tunnel Size	2.1661in / 55.020mm
Max Wall at Crown	0.0591in / 1.500mm	0.0585in / 1.487mm
Max Overall Length	0.6496in / 16.50mm
Notes	Suits 52mm journal only
Diagram (Top View)

Engines Subaru 4 cylinder 1.8 2.0 2.2 2.5
(EJ18, EJ20, EJ22, J25, EJ20T, EJ20TT, EJ22T, EJ25T)

€69.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race connecting rod bearings 4B8296HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B8296H	4B8296HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0466in / 51.984mm
Max Std Shaft Size	2.0472in / 51.000mm
Min Std Tunnel Size	2.1654in / 55.000mm
Max Std Tunnel Size	2.1661in / 55.020mm
Max Wall at Crown	0.0591in / 1.500mm	0.0585in / 1.487mm
Max Overall Length	0.6496in / 16.50mm
Notes	Suits 52mm journal only
Diagram (Top View)

Engines Subaru 4 cylinder 1.8 2.0 2.2 2.5
(EJ18, EJ20, EJ22, J25, EJ20T, EJ20TT, EJ22T, EJ25T)

€69.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race main bearings 5M8309H-0.25

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M8309H	5M8309HX
Sizes	STD, .025, .25, 0.5	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.3616in / 59.984mm
Max Std Shaft Size	2.3622in / 60mm
Min Std Tunnel Size	2.5197in / 64mm
Max Std Tunnel Size	2.5205in / 64.02mm
Max Wall at Crown	0.0789in / 2.005mm	0.0784in / 1.992mm
Max Overall Length	0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange)
Notes	Thrust in #5 pos.
Diagram (Top View)

Engines: Subaru - 1.8 2.0 2.2 2.5 (EJ18, EJ20, EJ22, EJ25, EJ20T, EJ20TT, EJ22T, EJ25T for thrust in #5 position)

€149.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race main bearings 5M8309H-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M8309H	5M8309HX
Sizes	STD, .025, .25, 0.5	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.3616in / 59.984mm
Max Std Shaft Size	2.3622in / 60mm
Min Std Tunnel Size	2.5197in / 64mm
Max Std Tunnel Size	2.5205in / 64.02mm
Max Wall at Crown	0.0789in / 2.005mm	0.0784in / 1.992mm
Max Overall Length	0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange)
Notes	Thrust in #5 pos.
Diagram (Top View)

Engines: Subaru - 1.8 2.0 2.2 2.5 (EJ18, EJ20, EJ22, EJ25, EJ20T, EJ20TT, EJ22T, EJ25T for thrust in #5 position)

€149.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race main bearings 5M8309HX-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M8309H	5M8309HX
Sizes	STD, .025, .25, 0.5	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.3616in / 59.984mm
Max Std Shaft Size	2.3622in / 60mm
Min Std Tunnel Size	2.5197in / 64mm
Max Std Tunnel Size	2.5205in / 64.02mm
Max Wall at Crown	0.0789in / 2.005mm	0.0784in / 1.992mm
Max Overall Length	0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange)
Notes	Thrust in #5 pos.
Diagram (Top View)

Engines: Subaru - 1.8 2.0 2.2 2.5 (EJ18, EJ20, EJ22, EJ25, EJ20T, EJ20TT, EJ22T, EJ25T for thrust in #5 position)

€149.00

Subaru EJ20 EJ22 EJ25 ACL Race Series main bearings 5M8297H-STD

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-Metal
Min. Std Shaft Size	2.3616in / 59.984mm
Max. Std Shaft Size	2.3622in / 60.000mm
Min. Std Tunnel Size	2.5197in / 64.000mm
Max. Std Tunnel Size	2.5205in / 64.020mm
Max Wall at Crown	0.0789in / 2.005mm
Max Overall Length	0.7480in / 19.00mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.8642in / 21.95mm (8299H/HX - Flange)
Weight	0.31
Notes	Thrust in #3 pos.

€139.00

Subaru CR4125XPG 2.0 2.2 2.5 connecting rod bearings

Subaru EJ20 EJ22 EJ25 King Racing connecting rod bearings CR4125XPG-0.25

SX	SX

C4125/PRG	C4125/PRG

Quantity

4

Crankshaft

51.999 / 51.984

Housing

55.001 / 55.019

Max Wall

1.501

Max Length

16.500

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€55.00

Subaru EJ20 EJ22 EJ25 King Racing connecting rod bearings CR4125XPG-0.50

SX	SX

C4125/PRG	C4125/PRG

Quantity

4

Crankshaft

51.999 / 51.984

Housing

55.001 / 55.019

Max Wall

1.501

Max Length

16.500

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€55.00

Subaru EJ20 EJ22 EJ25 King Racing connecting rod bearings CR4125XPG-STDX

SX	SX

C4125/PRG	C4125/PRG

Quantity

4

Crankshaft

51.999 / 51.984

Housing

55.001 / 55.019

Max Wall

1.501

Max Length

16.500

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€55.00

Subaru EJ20 EJ22 EJ25 King Racing connecting rod bearings CR4125XPGC-STDX Coated

SX	SX

C4125/PRG	C4125/PRG

Quantity

4

Crankshaft

51.999 / 51.984

Housing

55.001 / 55.019

Max Wall

1.501

Max Length

16.500

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€129.00

Subaru EJ20 EJ22 EJ25 King racing main bearings MB5382XPGC-0.25 Coated

SX	SX

F5382/PRG	F5382/PRG

SX	SX

M5382/1PRG	M5382/1PRG

SX	SX

M5382/2PRG	M5382/2PRG

Quantity

1

2

Crankshaft

60.000 / 59.985

Housing

64.000 / 64.021

Max Wall

2.004

Max Length

22.962

18.999

15.113

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€90.00

Subaru EJ20 EJ22 EJ25 King Racing main bearings MB5382XPGC-STD Coated

SX	SX

F5382/PRG	F5382/PRG

SX	SX

M5382/1PRG	M5382/1PRG

SX	SX

M5382/2PRG	M5382/2PRG

Quantity

1

2

Crankshaft

60.000 / 59.985

Housing

64.000 / 64.021

Max Wall

2.004

Max Length

22.962

18.999

15.113

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€90.00

Subaru Impreza WRX STI EJ205 EJ255 EJ257 Gates Racing timing belt T328RB

Product info:

Length: 2248mm

Width: 30mm

Number of tooth: 281

Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.

- Tensile cord reinforced with premium, high-strength glass cords.

- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.

- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.

The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.

€209.00

Subaru WRX 16V EJ20 / EJ25 Ferrea exhaust valve STD F6075

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

€29.00

Subaru WRX 2.0 16V EJ20 Mahle piston kit CR 8.0 92.5mm 930020342

Product detailed specification
Bore size	92.50mm
Stroke	75.00mm
Mahle compression ratio (CR)	8.0:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-12cm³
Compression height (CH)	32.70mm
Pin diameter	23mm
Features	PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

€799.00

Best sellers