There are no items in cart
|
Product detailed specification |
|
|
Bore size |
84.00mm |
|
Stroke |
89.60mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-7.3cm3 |
|
Compression height (CH) |
28.32mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
BMW E46, E39 - 3.0 24V (M54B30) |
Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.
Part number 52M02B
Depo Racing twin gauge holder-pod for 52mm gauges
*Better for left-hand drive
Clutch disc, torsion damped, with special organic clutch friction material.
Diameter: 240mm
Number of teeth: 24
Hub profile: 18,3x20,4-24N
Transmittable torque: 520Nm
Manufacturer compare numbers:
Audi
035 141 031 H
035 141 031 J
035 141 032 C
035 141 032 D
035 141 033 B
035 141 033 G
035 141 033 H
035 141 035 J
VW
035 141 031 H
035 141 031 J
035 141 032 C
035 141 032 D
035 141 033 B
035 141 033 G
035 141 033 H
035 141 035 J
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-3.6cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338463R
Gasket thickness: 1.35mm
Bore size: 82mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 52mm |
| Min. Std Tunnel Size | 2.1663in / 55.024mm |
| Max. Std Tunnel Size | 2.167in / 55.042mm |
| Max Wall at Crown | 0.0593in / 1.506mm |
| Max Overall Length | 0.7598in / 19.3mm |
| Weight | 0.253 |
| Notes | 0 |
| Position | 1,2,3,4,5,6 | ||||||
|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
||||||
| Quantity | 6 | ||||||
| Crankshaft | 57.978 / 57.958 | ||||||
| Housing | 63.000 / 63.017 | ||||||
| Max Wall | 2.499 | ||||||
| Max Length | 18.471 |
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: [email protected] (seat), 185Lbs@11mm (open/lift)
Spring coil bind: 20.00mm
Max lift: 13.60mm
Rate: 9.60Lbs/mm
Set includes:
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.1cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
23mm |
|
Features |
Accepts Turbo and Nitrous; full round skirt |
|
Fits for |
Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA) |
