Enjoy the Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications:

• Fittings In (mm): 11
• Fittings Out (mm): 9
• Pump: Ti Automotive (Walbro) F90000285
• Voltage DC: 12
• Pulse Width Modulation Compatible: Yes
• One way valve (NRV): Yes
• Flow Ltr/Hr (Max): 528
• Flow Ltr/Hr @ 3 Bar (44psi): 435
• Flow Ltr/Hr @ 5 Bar (73psi): 345
• Max Pressure (Bar): 8.3
• Length (mm): 130
• Diameter (mm): 50 / 39
• Weight (Kg): 0.430

Specifications:
Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85

Tassenstössel Daten:
Äußere Durchmesser - 34.97mm
Innere Durchmesser - 33.10mm
Äußer Höhe - 26.30mm
Stiellänge - 14.70mm
Stieldurchmesser - 7.00mm
Gewicht - 50g
8 Stk. FCP Engineering mechanische Tassenstößel.
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50.
Installierte Tassenstoßelhöhe zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten).