BMW

BMW M5 E34 S38B36 ACL Race Series connecting rod bearings 6B1568H-0.25

€199.00

BMW M5 4.4 V8 S63 Supertech valve spring set SPRK-BMS63B

Seat Pressure: 83lbs @ 35.7mm
Open Pressure: 165lbs @ 10mm
Max Lift: 11.2mm
Coil Bind: 23.00mm
Rate: 8.2
Set includes:
32pcs. SPR-FE20BE
32pcs. RET-BMN54-TE
32pcs. valve seals VSI-EC60-E

€1,499.00

BMW 2.0 M50B20TU M52B20 M52B20TU FCP steel con rods 145mm

BMW 2.0 M50B20TU M52B20 M52B20TU FCP H-beam steel connecting rods 145mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHB1454822-6
Profile: H-beam
C to C: 145mm
Big end diameter: 48mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW E34, E36, E39, E46 - 2.0 (M50B20TU, M52B20, M52B20TU)

€639.00

BMW M3 E36 3.0 3.2 S50B30 S50B32 EURO ARP cylinder head stud kit 201-S50B30/B32

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€353.00

BMW 3.2 S54B32 Athena Racing head gasket 87.50x1.2mm 330037R

BMW M3 E46 3.2 S54B32 Athena Cooper Ring cylinder head gasket 87.5x1.2mm 330037R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

Cometic BMW 1.8 1.9 M42 M44 MLS cylinder head gasket 86x3mm C4349-120

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€299.00

BMW 3er / M3 / M4 N55B30 S55B30 Ferrea exhaust valve STD F2428P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

BMW M3 E30 S14B20 ACL Race connecting rod bearings 4B1489H-0.25

€109.00

Boostline Conrod Set BMW / Toyota B58B30 148.18mm 625+ BM5834-866+

Purpose-Built For Boost High Boost and BMW B58B30 Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1500 HP
3/8 x 1.600 in. ARP CA625+ Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€2,399.00

BMW M5 S63B44 Supertech Intake / Exhaust Valve seal VSI-EC60E

€3.00

BMW M5 3.6 3.8 S38B36 S38B38 ARP main stud kit 201-5S38MSK

€269.00

BMW M3 E36 S50B30 ACL Race connecting rod bearings 6B1515H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B1515H	6B1515HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9675in / 49.975mm
Max Std Shaft Size	1.9681in / 49.991mm
Min Std Tunnel Size	2.0866in / 53.000mm
Max Std Tunnel Size	2.0875in / 53.015mm
Max Wall at Crown	0.0588in / 1.493mm	0.0538in / 1.481mm
Max Overall Length	0.709in / 18.00mm
Notes
Diagram (Top View)

Engines BMW M3 E36 - 3.0 (S50B30)

€199.00