There are no items in cart
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B7820H |
4B7820HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8898 in / 48.000 mm |
|
| Max Std Shaft Size | 1.8905 in / 48.020 mm | |
| Min Std Tunnel Size | 2.0310 in / 51.587 mm | |
| Max Std Tunnel Size | 2.0315 in / 51.600 mm | |
| Max Wall at Crown | 0.0696 in / 1.768 mm | 0.0691 in / 1.755 mm |
| Max Overall Length |
0.807 in / 20.50 mm |
|
| Notes | ||
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B8296H |
4B8296HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0466in / 51.984mm |
|
| Max Std Shaft Size |
2.0472in / 51.000mm |
|
| Min Std Tunnel Size |
2.1654in / 55.000mm |
|
| Max Std Tunnel Size |
2.1661in / 55.020mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0585in / 1.487mm |
| Max Overall Length |
0.6496in / 16.50mm |
|
| Notes | Suits 52mm journal only | |
|
Diagram |
 |
|
Part number 2T1644-STD
ACL thrust washers kit
Audi / VW - 1.6 1.8 2.0 (1983-2001)
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
| 1,2,3,4,5 | |||||||
| Pairs & PN |
|
||||||
| Quantity | 5 | ||||||
| Crankshaft | 57.000 / 56.985 | ||||||
| Housing | 61.001 / 61.021 | ||||||
| Max Wall | 1.989 | ||||||
| Max Length | 20.599 |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF) |
Set includes:
1 crankshaft seal front
1 crankshaft seal rear
1 oil filter housing gasket
1 oil pump gasket
1 universal sealing compound
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
