There are no items in cart
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Spring data:
Outer spring outer diameter: 25.00mm
Outer spring inner diameter: 18.00mm
Inner spring outer diameter: 18.00mm
Inner spring inner diameter: 13.00mm
Seat pressure: 73Lbs@35.40mm (seat), 202Lbs@10.5mm (open/lift)
Spring coil bind: 21.00mm/17.00mm
Max lift: 14.40mm
Rate: 12.60Lbs/mm
Set includes:
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
94.00mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-14.00cm3 |
|
Compression height (CH) |
30.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR serie; Tuff coated piston skirt |
|
Fits for |
Toyota Supra - 3.0 Stroker (2JZGTE) |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-17.10cm3 |
|
Compression height (CH) |
34.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series; skirt coated |
|
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 6B8100H |
6B8100HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0465in / 51.981mm |
|
| Max Std Shaft Size |
2.0472in / 52mm |
|
| Min Std Tunnel Size |
2.1663in / 55.024mm |
|
| Max Std Tunnel Size |
2.167in / 55.042mm |
|
| Max Wall at Crown |
0.0593in / 1.506mm |
0.0588in / 1.493mm |
| Max Overall Length |
0.7598in / 19.3mm |
|
| Notes | ||
|
Diagram |
 |
|
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.4403in / 61.984mm |
| Max. Std Shaft Size | 2.441in / 62.001mm |
| Min. Std Tunnel Size | 2.5992in / 66.02mm |
| Max. Std Tunnel Size | 2.5998in / 66.035mm |
| Max Wall at Crown | 0.0789in / 2.004mm |
| Max Overall Length | 0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX) |
| Weight | 0.44 |
| Notes | 0 |
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 80Lbs@33.60mm (seat), 185Lbs@11mm (open/lift)
Spring coil bind: 20.00mm
Max lift: 13.60mm
Rate: 9.60Lbs/mm
Set includes:
