Top Sellers

VW 2.0 16V ABF JE Pistons kit CR 13.0 83.50mm 338938C

Product detailed specification
Bore size	83.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	13.0:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	13.5cm³
Compression height (CH)	30.60mm
Pin diameter	21mm
Features	Made by order; FSR series skirt
Fits for	VW / Seat - 2.0 16V ABF

€1,099.00

VW 2.0 16V ABF Supertech Inconel exhaust valve VWEVI-1032F STD

Product detailed specification
Model number	VWEVI-1032F
Head diameter	27.00mm
Stem diameter	7.00mm
Length	98.20mm
Material	Inconel
Fits for	VW - 2.0 16V (ABF)

€39.00

VW 2.0 16V ABF Wiseco pistons CR 8.5 82.5mm KE188M825

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11cm³
Compression height (CH)	30.60mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	VW / Seat - 2.0 16V ABF

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

VW 2.0 16V ABF Wiseco pistons CR 8.5 83mm KE188M83

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11cm³
Compression height (CH)	30.60mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	VW / Seat - 2.0 16V ABF

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

VW 2.8 12V VR6 FCP racing valve spring and retainer kit

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
12 pcs. outer springs
12 pcs. inner springs
12 pcs. titanium retainers
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€299.00

VW 2.8 12V VR6 FCP racing valve spring kit

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
12 pcs. outer springs
12 pcs. inner springs
With this set the risk of valve flutter and a possible engine failure is minimized.

€149.00

VW/Audi VR6 2.8 2.9 AES AFP AMY 83.00mm bore

VW 2.8 2.9 12V VR6 Athena Racing MLS cylinder head gasket 83x1.65mm 338321R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338321R
Gasket thickness: 1.65mm
Bore size: 83.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€255.00

VW 2.8 2.9 12V VR6 FCP racing solid lifters (cam followers, tappets)

Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
12 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

€275.00

VW VWEVN-1007 standard 2.8 exhaust valve

VW 2.8 2.9 12V VR6 Supertech exhaust valve VWEVN-1007 STD

Product detailed specification
Model number	VWEVN-1007
Head diameter	34.20mm
Stem diameter	6.95mm
Length	106.95mm
Material	Black nitrided stainless steel
Fits for	VW Corrado, Golf, Passat – 2.8 2.9 12V VR6

€28.00

VW 2.8 2.9 12V VR6 Supertech Inconel exhaust valve VWEVI-1010 +1.8mm

Product detailed specification
Model number	VWEVI-1010
Head diameter	36.00mm
Stem diameter	6.95mm
Length	106.95mm
Material	Inconel
Fits for	VW Corrado, Golf, Passat – 2.8 2.9 12V VR6

€39.00

VW 2.8 2.9 VR6 forged JE Pistons kit 83mm CR 9.0 186236

Product detailed specification
Bore size	83.00mm
Stroke	90.30mm
JE Pistons compression ratio (CR)	9.0:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11.50cm³
Compression height (CH)	32.39mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW 2.8 2.9 12V VR6 Turbo (AAA, AES, AMY, ABV)

€1,349.00

VW 2.8 24V, 3.2 24V R32 VR6 FCP racing valve spring and retainer kit

Valve springs data
Installed seat pressure - 38kg
Load - 91kg@10.2mm
Max. lift - up to 13.10mm
Made from chrome-silicon steel SAE9254-V
24 pcs. outer springs
24 pcs. inner springs
24 pcs. titanium retainers
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float.

€599.00

Best sellers