There are no items in cart
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA14450622-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Part number: FCPPA815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 6B1490H |
6B1490HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7707in / 44.975mm |
|
| Max Std Shaft Size |
1.7713in / 44.991mm |
|
| Min Std Tunnel Size |
1.8898in / 48.000mm |
|
| Max Std Tunnel Size |
1.8904in / 48.016mm |
|
| Max Wall at Crown |
0.0588in / 1.493mm |
0.0583in / 1.481mm |
| Max Overall Length |
0.709in / 18.00mm |
|
| Notes | ||
|
Diagram |
 |
|
Engines BMW - 2.0 2.3 2.5 2.7 2.8 3.0 (M20B20, M20B25, M20B27, M50B20,
M50B25, M50B27, M52B20, M52B25, M52B28, M54B25, M54B22, M54B30)
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Spring data:
Seat pressure - 82lbs @ 31.75mm
Open (lift) pressure - 224lbs @ 11.50mm
Spring coil bind - 16.70mm
Max lift - 13.00mm
Rate - 12.50mm
Outer spring outer diameter - 30.40mm
Outer spring inner diameter - 23.20mm
Inner spring outer diameter - 21.90mm
Inner spring inner diameter - 16.50mm
Set includes:
Double springs - 16 pcs. SPR-V2093-4
Titanium retainers - 16 pcs. RET-027
Seats - 16 pcs. SEAT-V2093-16
| ENGINE BEARINGS | ||
|
MAIN BEARING SET |
|
| Part# | ||
| 5M7807H |
5M7807HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.1569 in / 54.785 mm |
|
| Max Std Shaft Size | 2.1573 in / 54.795 mm | |
| Min Std Tunnel Size | 2.3122 in / 58.731 mm | |
| Max Std Tunnel Size | 2.3128 in / 58.744 mm | |
| Max Wall at Crown | 0.0765 in / 1.945 mm |
0.0760 in / 1.933 mm |
| Max Overall Length | 0.728 in / 18.50 mm | |
| Notes | ||
|
Diagram |
 |
|
Engines Renault 4 cylinder 1.6 1.7 1.8 1.9 2.0
(F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R; F8M, F8Q - diesel)
| ENGINE BEARINGS | ||
|
MAIN BEARING SET |
|
| Part# | ||
| 5M1644H |
5M1644HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.1243in / 53.958mm | |
| Max Std Shaft Size | 2.1251in / 53.978mm | |
| Min Std Tunnel Size | 2.3228in / 59.000mm | |
| Max Std Tunnel Size | 2.3236in / 59.019mm | |
| Max Wall at Crown | 0.0985in / 2.502mm | 0.0980in / 2.489mm |
| Max Overall Length | 0.728in / 18.49mm | |
| Notes | Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower. | |
|
Diagram |
|
|
Engines VAG group 4 cylinder engines 1.6 1.8 2.0 16-20V (KR, PL, AEB, etc.)
