There are no items in cart
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fit for oversize bores).
Part number: 330045R
Gasket thickness: 1.60mm
Bore size: 84.00mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338284R
Gasket thickness: 1.20mm
Bore size: 83.00mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
|
Product detailed specification |
|
|
Model number |
FEVN-1035 |
|
Head diameter |
28.00mm |
|
Stem diameter |
6.012mm |
|
Length |
96.70mm |
|
Material |
Black nitrited |
|
Fits for |
Ford / Mazda - 2.0 16V (Zetec) |
|
Product detailed specification |
|
|
Model number |
FIVN-1035 |
|
Head diameter |
32.00mm |
|
Stem diameter |
6.035mm |
|
Length |
97.10mm |
|
Material |
Black nitrited |
|
Fits for |
Ford Zetec - 2.0 16V |
|
Product detailed specification |
|
|
Model number |
FIVN-1037 |
|
Head diameter |
33.00mm |
|
Stem diameter |
6.035mm |
|
Length |
197.10mm |
|
Material |
Black nitrited |
|
Fits for |
Ford Zetec - 2.0 16V |
Bosch INLINE fuel pump specs:
Bosch part number: 0 580 254 044
Minimum current: 12 V
Operating pressure: 94 PSI (6.5 Bar)
Minimum flow @ outlet: 80 GPH (300 LPH)
Fuel pump location: in line
High temperature reduction: 8 GPH (30 LPH)
Weight: 930 g (2.05 Pounds)
Inlet: 18x1.5
Outlet: 12x1.5
- >275l/h @ 5bar
- Supercedes the 0 580 254 044
- Flows ~10% higher than 044 at 7bar
- Weighs 15% less than 044 at 860g
- Current draw similar to 044
- M18x1.5 inlet fitting and M12x1.5 outlet fitting
- External non return valve
- Pressure relief valve 8-10bar
- Not suitable for voltage regulation
- Compatible with Gasoline and Diesel
- Generic use
- Custom applications
- May require custom fittings & adaptors
