Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Nissan

Nissan GT-R 3.8 VR38DETT Athena Cooper ring cylinder head gasket set...
Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330067R + 330068R
Gasket thickness: 1mm
Bore size: 100.50mm

Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€345.00
Nissan Skyline 2.5 RB25DET Wiseco Pistons CR 8.4 86.50mm K578M865AP

Product detailed specification

Bore size

86.50mm

Stroke

71.70mm

Wiseco compression ratio (CR)

8.4:1

OEM compression ratio (CR)

9.0:1

Dome volume (CC)

14cm3

Compression height (CH)

31.50mm

Pin diameter

21mm

Features

Accepts Turbo and Nitrous

Fits for

Nissan Skyline

2.5 24V (RB25DET)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.
€1,199.00
Nissan 180SX CA18DET Wiseco pistons CR 8.5 83.50mm K630M835

Product detailed specification

Bore size

83.50mm

Stroke

83.60mm

Wiseco compression ratio (CR)

8.5:1

OEM compression ratio (CR)

8.0:1

Dome volume (CC)

-0.5cm3

Compression height (CH)

29.75mm

Pin diameter

20mm

Features

Accepts Turbo and Nitrous

Fits for

Nissan 180SX (S13) 1.8 16V (CA18DET)
€799.00
Nissan 200SX 2.0 SR20DET ARP cylinder head stud kit 102-4701
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€301.00
Cometic Nissan RB25 2.5 1989-02 MLS cylinder head gasket 87x1.3mm C4318-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€245.00
Cometic Nissan VR38DETT 3.8 V6 MLX cylinder head gasket kit 100x0.81mm...
COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.
€265.00
Nissan SR20DE SR20DET ACL Race connecting rod bearings 4B2960H-0.25

ENGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2960H

4B2960HX

 
Sizes STD, .025, .25 STD
Oil Clearance Standard + 0.001" Extra
Half Type Identical Halves
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.888in / 47.956mm

Max Std Shaft Size

1.8887in / 47.974mm

Min Std Tunnel Size

2.0079in / 51.000mm

Max Std Tunnel Size

2.0084in / 51.013mm

Max Wall at Crown

0.0592in / 1.503mm

0.0587in / 1.490mm

Max Overall Length

0.673in / 17.10mm

Notes

Diagram       
(Top View) 

4B2960H.jpg

Engines Nissan - 2.0 (SR20DE, SR20DET (not GTiR))

€68.00
Cometic Nissan RB26 2.6 1989-02 MLS cylinder head gasket 87x1.3mm C4320-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
€245.00
Nissan 2.0 16V SR20DET (GTiR) King Racing connecting rod bearings CR4587XP-STD
XP XP
1019.jpg 1019.jpg
C4587-PR C4587-PR
Quantity   4
Crankshaft   47.973 / 47.955
Housing   51.001 / 51.013
Max Wall   1.504
Max Length   19.101
Engines  Nissan 2.0 16V GTiR (SR20DET)
€55.00
Nissan 200SX SR20DET Wiseco pistons CR 9.1-9.25 86.25mm K556M8625AP

Product detailed specification

Bore size

86.25mm

Stroke

86.00mm

Wiseco compression ratio (CR)

9.1-9.25:1

OEM compression ratio (CR)

8.5:1

Dome volume (CC)

-12cm3

Compression height (CH)

32.00mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous

Fits for

Nissan 180SX, 200SX (S13, S14) 
         2.0 16V (SR20DET)
Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.
€799.00
1
6 7 8 9