Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Toyota

Subaru BRZ FA20 / Toyota 4U-GSE ACL connecting rod bearings 4B8310H-0.25

Sizes STD, .025, .25
Oil Clearance
Half Type
Material F781
Min. Std Shaft Size 49.976
Max. Std Shaft Size 50.000
Min. Std Tunnel Size 53.000
Max. Std Tunnel Size 53.024
Max Wall at Crown 1,504
Max Overall Length 15,6
Weight 0.133
Notes
€79.00
Subaru BRZ FA20 / Toyota 4U-GSE ACL main bearings 5M8312H
Sizes STD, .025, .25, .50
Oil Clearance
Half Type Identical halves
Material F780
Min. Std Shaft Size 2.6766in /67.985mm
Max. Std Shaft Size 2.6775in /68.009mm
Min. Std Tunnel Size 2.874in /73mm
Max. Std Tunnel Size 2.8746in /73.016mm
Max Wall at Crown 0.0986in /2.505mm
Max Overall Length 0.6929in /17.6mm
Weight 0
Notes
€129.00
ACL plain bearing measuring tape/flexigauge AG-1 (Green)
1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.
€16.00
Toyota 1UZ/2UZ/3UZ-FE ACL Race connecting rod bearings 8B8091H-STD
Oil Clearance Standard
Half Type Identical Halves
Material Tri-metal Hardened steel backs
Min. Std Shaft Size 2.0465in / 51.981mm
Max. Std Shaft Size 2.0472in / 51.999mm
Min. Std Tunnel Size 2.1654in / 55.001mm
Max. Std Tunnel Size 2.1663in / 55.024mm
Max Wall at Crown 0.0589in / 1.496mm
Max Overall Length 0.7677in / 19.5mm
Weight 0.33
€145.00
1 2 3