Top Sellers

Audi TT RS 2.5 20V TFSI Athena Cooper Ring cylinder head gasket 84x1.4m 330072R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330072R
Gasket thickness: 1.40mm
Bore size: 84.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€255.00

Audi TT RS 2.5 20V TFSI DAZA ARP cylinder head stud kit 204-4708

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€425.00

Audi TT RS 2.5 20V TFSI DAZA Athena Cooper Ring cylinder head gasket...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330117R
Gasket thickness: 1.40mm
Bore size: 83.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

Audi TTRS / RS3 2.5 20V TFSI Victor Reinz head gasket kit 02-42820-01

€245.00

Audi TTRS / RS3 CEPA CEPB ACL Race Series main bearings 6M5563H-0.25

€195.00

Audi TTRS / RS3 CEPA CEPB ACL Race Series main bearings 6M5563H-STD

€195.00

Audi TTRS / RS3 CEPA DAZA ACL Race Series connecting rod bearing set...

€149.00

Audi TTRS / RS3 DAZA DNWA ACL Race Series main bearings 6M5587H-STD

€209.00

Audi TTRS / RS3 DAZA DNWA ACL Race Series main bearings 6M5587HX-STD

€209.00

Audi TTRS 2.5 20V TFSI (CEPA, CEPB) Mahle piston kit CR 10.0 82.50mm 197915148

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
MAHLE compression ratio (CR)	10.0:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-5.00cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	PowerPak Plus M142P Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Audi TTRS 2.5 20V TFSI (CEPA, CEPB)

€999.00

Audi TTRS 2.5 20V TFSI FCP valve spring kit

Spring data:
Seat pressure - 82lbs @ 37.00mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 24.90mm
Max lift - 11.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 20 pcs.

€299.00

Audi TTRS 2.5 20V TFSI JE Pistons kit CR 9.5 83.50mm 337968

Product detailed specification
Bore size	83.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-8.80cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; FSR Series coated skirt
Fits for	Audi TTRS 2.5 20V TFSI

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,099.00

Audi TTRS 2.5 20V TFSI JE Pistons kit CR 9.5 83mm 337967

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-8.10cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; FSR Series coated skirt
Fits for	Audi TTRS 2.5 20V TFSI

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,099.00

Audi TTRS 2.5 20V TFSI valve spring and titanium retainer kit

Spring data:
Seat pressure - 70lbs @ 38.40mm (intake), 82lbs @ 37.00mm (exhaust)
Open (lift) pressure - 172lbs @ 10mm (intake), 180lbs @ 10mm (exhaust)
Max lift - 11.90mm (intake), 10.60mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 20 pcs.
Titanium retainers - 20 pcs.

€549.00

Audi TTRS 2.5 20V TFSI Wiseco pistons CR 9.2 82.50mm K743M825

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wiseco compression ratio (CR)	9.2:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-9.50cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Audi TTRS 2.5 20V TFSI

€999.00

Audi TTRS RS3 2.5 20V TFSI FCP H-beam steel connecting rods 144mm/22mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA14450622-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM

€539.00

Audi TTRS RS3 2.5 20V TFSI FCP H-beam steel connecting rods 144mm/22mm for...

Product detailed specification

Manufacturer: FCP Engineering

Model: FCPRHA14450622T-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 22mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM

€539.00

Audi TTRS RS3 2.5 20V TFSI FCP H-beam steel connecting rods 144mm/23mm for...

Product detailed specification

Manufacturer: FCP Engineering

Model: FCPRHA14450623T-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM

€539.00

Audi TTRS RS3 2.5 20V TFSI FCP X-beam steel connecting rods 144mm/22mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA14450622-5
Profile: X-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM

€719.00

Audi TTRS RS3 2.5 20V TFSI FCP X-beam steel connecting rods 144mm/23mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA14450623T-5
Profile: X-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating:1000HP (5 cylinder)
Advertised RPM rating: 9000RPM

€719.00

Audi TTRS, RS3 2.5 20V TFSI Ultra Series JE Pistons kit CR 9.5 82.5mm 367846

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-7.5cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi TTRS, RS3 - 2.5 20V TFSI

€1,349.00

Audi TTRS, RS3 2.5 20V TFSI Ultra Series JE Pistons kit CR 9.5 83mm 367847

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-8.10cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi TTRS, RS3 - 2.5 20V TFSI

€1,349.00

Audi 3.6-4.2 V8 32V racing valve spring kit

Audi V8 S4 3.6 4.2 32V PT / ABH FCP valve spring set

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
32 pcs. outer springs
32 pcs. inner springs
Fits 8 cylinder 32V Audi engines PT, ABH.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

€479.00

Audi/VW 1.8 2.0 16V KR PL, 1.8T 20V FCP X-beam steel connecting rods 144mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA14450620-4
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW / Seat / Skoda:
1.8T 20V (AEB, BAM, AWB and others)
1.8 2.0 16V (KR, PL, 9A)

€549.00

Best sellers