Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

4B11

Mitsubishi CR4586XP-STD 4 cilindrų švaistikliniai indėklai
Mitsubishi EVO X 4B11T King Racing švaistikliniai indėklai CR4586XP-STD
Position Connecting rod:
1, 2, 3, 4
Pairs
&
Part Numbers
XP XP
1016.jpg 1016.jpg
C4586-PR C4586-PR
Quantity  4
Crankshaft Diameter  51.971 / 51.953mm
Housing Diameter  55.001 / 55.009mm
Max Wall Thickness  1.501mm
Max Length  17.000mm
Engines Mitsubishi - 2.0 16V Turbo (4B11T)
63,00 EUR
Mitsubishi CR4586XP-STD 4 cilindrų švaistikliniai indėklai
Mitsubishi EVO X 4B11T King Racing švaistikliniai indėklai CR4586XP-STDX
Position Connecting rod:
1, 2, 3, 4
Pairs
&
Part Numbers
XP XP
1016.jpg 1016.jpg
C4586-PR C4586-PR
Quantity  4
Crankshaft Diameter  51.971 / 51.953mm
Housing Diameter  55.001 / 55.009mm
Max Wall Thickness  1.501mm
Max Length  17.000mm
Engines Mitsubishi - 2.0 16V Turbo (4B11T)
63,00 EUR
Mitsubishi CR4586XP-STD 4 cilindrų švaistikliniai indėklai
Mitsubishi EVO X 4B11T King Racing švaistikliniai indėklai CR4586XP-0.25
Position Connecting rod:
1, 2, 3, 4
Pairs
&
Part Numbers
XP XP
1016.jpg 1016.jpg
C4586-PR C4586-PR
Quantity  4
Crankshaft Diameter  51.971 / 51.953mm
Housing Diameter  55.001 / 55.009mm
Max Wall Thickness  1.501mm
Max Length  17.000mm
Engines Mitsubishi - 2.0 16V Turbo (4B11T)
63,00 EUR
Mitsubishi EVO IV-IX MB5209XP 4 cilindrų pagrindiniai indėklai
Mitsubishi EVO X 4B11T King Racing pagrindiniai indėklai MB5722XP-STD
Position Main:
1, 2, 3, 4, 5
Pairs
&
Part Numbers
XP XP
1652.jpg 1003.jpg
M5722U-PR M5722L-PR
Quantity  5
Crankshaft Diameter  51.984 / 51.973mm
Housing Diameter  55.999 / 56.017mm
Max Wall Thickness  1.996mm
Max Length  18.001mm
Engines Mitsubishi - 2.0 16V Turbo (4B11T)
115,00 EUR
Mitsubishi EVO IV-IX MB5209XP 4 cilindrų pagrindiniai indėklai
Mitsubishi EVO X 4B11T King Racing pagrindiniai indėklai MB5722XP-0.25
Position Main:
1, 2, 3, 4, 5
Pairs
&
Part Numbers
XP XP
1652.jpg 1003.jpg
M5722U-PR M5722L-PR
Quantity  5
Crankshaft Diameter  51.984 / 51.973mm
Housing Diameter  55.999 / 56.017mm
Max Wall Thickness  1.996mm
Max Length  18.001mm
Engines Mitsubishi - 2.0 16V Turbo (4B11T)
115,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

13,00 EUR