Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Suzuki

Toyota CR6754XP 2.5 3.0 švaistiklių indėklai
Suzuki 1.3 16V King Racing švaistikliniai indėklai CR4605XP-STD
XP XP
1059.jpg 1059.jpg
C4605-PR C4605-PR
Quantity 4
Crankshaft 41.999 / 41.981
Housing 44.999 / 45.019
Max Wall 1.491
Max Length 18.230
Engines Suzuki - 1.3 16V (G13A, G13B, G13BB, G13BA)
45,00 EUR
Suzuki 1.3 16V, 8V King racing pagrindiniai indėklai MB5731XP-STD
Position
Pairs & PN
XP XP
1391.jpg 1311.jpg
M5731U-PR M5731L-PR
Quantity  5
Crankshaft  44.994 / 44.981
Housing  48.999 / 49.017
Max Wall  1.999
Max Length  18.230
Engines Suzuki - 1.3 16V, 8V (G31A, G13B, G13BA, G13BB)
85,00 EUR
Toyota CR6754XP 2.5 3.0 švaistiklių indėklai
Suzuki 1.5 1.6 1.8 16V King Racing švaistikliniai indėklai CR4594XP-STD
XP XP
1059.jpg 1059.jpg
C4594-PR C4594-PR
Quantity  4
Crankshaft  41.999 / 41.981
Housing  45.001 / 45.019
Max Wall  1.491
Max Length  18.100
Engines 1.5 1.6 1.8 16V (M15A, M16A, M18A)
85,00 EUR
Suzuki 1.5 1.6 1.8 16V King Racing pagrindiniai indėklai MB5727XP
Suzuki 1.5 1.6 1.8 16V King Racing pagrindiniai indėklai MB5727XP-STD
XP XP
1219.jpg 1311.jpg
M5727U-PR M5727L-PR
Quantity 5
Crankshaft 51.999 / 51.981
Housing 55.999 / 56.017
Max Wall 1.999
Max Length 18.199
Engines: Suzuki - 1.5 1.6 1.8 16V (M15A, M16A, M18A)
120,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

13,00 EUR