Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Lada

LADA 1200-1500 1973ON King Racing švaistikliniai indėklai CR4007XP-0.25
Position
Pairs & PN
XP XP
1039.jpg 1039.jpg
C4007-PR C4007-PR
Quantity 4
Crankshaft 47.813 / 47.833
Housing 51.331 / 51.346
Max Wall 1.730
Max Length 20.599
FL O/S  
79,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

12,00 EUR