Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Ford

Ford CR4440XP 2.0 švaistikliniai indėklai
Ford Cosworth 2.0 YB King Racing švaistikliniai indėklai CR4440XP-STD
XP XP
1022.jpg 1022.jpg
C4440-PR C4440-PR
Quantity   4
Crankshaft   51.999 / 51.989
Housing   54.999 / 55.019
Max Wall   1.491
Max Length   19.969
Engines Ford Cosworth - 2.0 16V (YB)
50,00 EUR
Ford Cosworth 2.0 YB King Racing švaistikliniai indėklai CR4440XP-STD
XP XP
1022.jpg 1022.jpg
C4440-PR C4440-PR
Quantity   4
Crankshaft   51.999 / 51.989
Housing   54.999 / 55.019
Max Wall   1.491
Max Length   19.969
Engines Ford Cosworth - 2.0 16V (YB)
50,00 EUR
Ford Cosworth 2.0 YB King Racing švaistikliniai indėklai CR4440XP-0.25
XP XP
1022.jpg 1022.jpg
C4440-PR C4440-PR
Quantity   4
Crankshaft   51.999 / 51.989
Housing   54.999 / 55.019
Max Wall   1.491
Max Length   19.969
Engines Ford Cosworth - 2.0 16V (YB)
50,00 EUR
Ford MB5672XP 2.0 pagrindiniai indėklai
Ford Cosworth 2.0 YB King Racing pagrindiniai indėklai MB5672XP-STD
Oil clearance: Standard
Half type: identical
Material: Tri-metal
Min std shaft size: 2.2437 in / 56.990 mm
Max std shaft size: 2.2441 in / 57.000mm
Min std tunnel size: 2.3866 in / 60.620 mm
Max std tunnel size: 2.3874 in / 60.640 mm
Max wall at crown: 0.0710 in / 1.803 mm
Max overall length: 0.935 in / 23.75 mm
Ford Cosworth - 2.0 16V (YB)
73,00 EUR
Ford Cosworth 2.0 YB King Racing pagrindiniai indėklai MB5672XP-0.25
Oil clearance: Standard
Half type: identical
Material: Tri-metal
Min std shaft size: 2.2437 in / 56.990 mm
Max std shaft size: 2.2441 in / 57.000mm
Min std tunnel size: 2.3866 in / 60.620 mm
Max std tunnel size: 2.3874 in / 60.640 mm
Max wall at crown: 0.0710 in / 1.803 mm
Max overall length: 0.935 in / 23.75 mm
Ford Cosworth - 2.0 16V (YB)
73,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

13,00 EUR