1.6

Honda 1.5 1.6 ACL Race švaistikliniai indėklai 4B1956H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1956H	4B1956HX
Sizes	STD, 025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.7709in / 44.98mm
Max Std Shaft Size	1.7717in / 45mm
Min Std Tunnel Size	1.8898in / 48mm
Max Std Tunnel Size	1.8906in / 48.02mm
Max Wall at Crown	0.0592in / 1.504mm	0.0587in /1.491 mm
Max Overall Length	0.7283in / 18.5mm
Notes
Diagram (Top View)

Engines Honda - 1.5 1.6 (D16A6, D16Y5, D16Y7, D16Y8, D16Z6)

69,00 €

Honda 1.6 1.7 1.8 2.0 ACL Race švaistikliniai indėklai 4B1946H-STD

63,00 €

Honda 1.6 1.7 1.8 2.0 ACL Race Series švaistikliniai indėklai 4B1946H-0.25

63,00 €

Honda 1.6 1.7 1.8 2.0 2.2 2.3 ACL Race pagrindiniai indėklai 5M1957H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-Metal
Min. Std Shaft Size	2.1646in / 54.980mm
Max. Std Shaft Size	2.1654in / 55.000mm
Min. Std Tunnel Size	2.3228in / 59.000mm
Max. Std Tunnel Size	2.3236in / 59.020mm
Max Wall at Crown	0.0790in / 2.007mm
Max Overall Length	0.7874in / 20.00mm
Weight	0.28
Notes	0

92,00 €

Honda 1.6 1.7 1.8 2.0 2.2 2.3 ACL Race pagrindiniai indėklai 5M1957H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-Metal
Min. Std Shaft Size	2.1646in / 54.980mm
Max. Std Shaft Size	2.1654in / 55.000mm
Min. Std Tunnel Size	2.3228in / 59.000mm
Max. Std Tunnel Size	2.3236in / 59.020mm
Max Wall at Crown	0.0790in / 2.007mm
Max Overall Length	0.7874in / 20.00mm
Weight	0.28
Notes	0

92,00 €

Honda 1.6 1.7 1.8 2.0 2.1 2.2 2.3 2.4 ACL šoniniai indėklai 1T1957-STD

Prekės kodas 1T1957-STD
ACL šoninių indėklų komplektas
Honda - 1.6 1.7 1.8 2.0 2.1 2.2 2.3 2.4 (D16A, D16B, D16W, D16Y, D16Z, A18A, ES, ET, A20A, B16A, B17A1, B18A1, B18B1, B18B2, B18A, B20A SOHC, B18C1, B18C2, B18C5, B18C7, B20A, B21A, B21A1 DOHC, B20B, B20Z, D17A, D17Z, K20A3, K20A2, K20Z1, K24A, K24Z1, H22A, H22Z, F23A, F23Z)

15,00 €

Honda 1.6 1.7 1.8 2.0 2.4 ACL Race pagrindiniai indėklai 5M1959H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.1646in / 54.98mm
Max. Std Shaft Size	2.1654in / 55mm
Min. Std Tunnel Size	2.3228in / 59mm
Max. Std Tunnel Size	2.3236in / 59.02mm
Max Wall at Crown	0.0788in / 2.002mm
Max Overall Length	0.7874in / 20mm
Weight	0.285
Notes	0

89,00 €

ACL Race Series tepalo siurblys Honda B20B4, B18C1, B16A2, B20Z2 OPHD1194HP

ACL RACE Series performance oil pumps and passenger car oil pumps assure constant and

uninterrupted flow throughout the engine’s circulatory system, ensuring the lubrication

system does not miss a beat. ACL RACE Series oil pumps are designed with high output

and high volume capabilities featuring gerotor sets that are precision machined from steel

copper alloy material. Fine tolerances ensure optimum pressure and flow.

Performance Oil Pump features:

• Increased flow and pressure characteristics

• Individually inspected and tested to assure pressure and flow characteristics

RPM	Litres/Min	Gal/Min	Hi Volume Litres/Min	Hi Volume Gal/Min
600	5,6	1,48	6,83	1,8
3000	27,3	7,2	33,3	8,8
5000	32,7	8,64	39,9	10,54

299,00 €

Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 120000417001

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

18,00 €

ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml (1 vnt.)

18,00 €

ACL race series tepalo siurblys Honda D15 / D16A6 / D16Z6 OPHD1040HP

Orbit performance oil pumps are designed with high output and volume capabilities required for high RPM performance engines. The gerotors are precision machined from steel-copper alloy (FC0205), an exceptionally durable metal that assures dependability and durability. Tight housing and gerotor tolerances provide optimum pressure and flow requirements. Housings are die cast DC-12 aluminum and are anodized to prevent corrosion. All pumps are individually inspected and tested.

269,00 €