Mini

Parodyti:

Rikiuoti pagal:

Mini Cooper 1.6 16V W11B16 King Racing švaistikliniai indėklai CR4600XP-STD

Pairs & PN

XP	XP

C4600-PR	C4600-PR

Quantity

Crankshaft

46.007 / 45.992

Housing

48.999 / 49.019

Max Wall

1.488

Max Length

17.351

Engines Mini 1.6 16V (W11B16)

99,00 EUR

Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 120000417001

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

18,00 EUR

Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml (12 vnt.)

215,00 EUR

BMW / Mini N14B16C King Racing šoniniai indėklai TW1046AM

12,00 EUR

ACL indėklų tarpelio matavimo juostelių rinkinys AR-1 (Raudonos sp.)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 EUR