Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Opel / Vauxhall

Opel/Vauxhall CR4017XP 4 cilindrų švaistikliniai indėklai
Opel C20LET Z20LET King Racing švaistikliniai indėklai CR4017XP-STD
XP XP
1037.jpg 1001.jpg
C4017-PR C 421L-PR
Quantity  4
Crankshaft  48.986 / 48.971
Housing  51.999 / 52.012
Max Wall  1.496
Max Length  19.271
Varikliams: 1.8 16V (C18XE, C18XEL, X18XE)
2.0 16V (20XE, C20NE, C20XE, C20LET, X20SE, X20XEV, Z20LET, Z20LEH, Z20LER)
2.2 16V (C22SEL, X22XE, X22SE, Y22SE)
59,00 EUR
Opel C20XE C20LET Z20LET King Racing rod bearings CR4017XP-STDX
XP XP
1037.jpg 1001.jpg
C4017-PR C 421L-PR
Quantity  4
Crankshaft  48.986 / 48.971
Housing  51.999 / 52.012
Max Wall  1.496
Max Length  19.271
Engines: 1.8 16V (C18XE, C18XEL, X18XE)
2.0 16V (20XE, C20NE, C20XE, C20LET, X20SE, X20XEV, Z20LET, Z20LEH, Z20LER)
2.2 16V (C22SEL, X22XE, X22SE, Y22SE)
59,00 EUR
Opel/Vauxhall CR4017XP 4 cilindrų švaistikliniai indėklai
Opel C20LET Z20LET King Racing švaistikliniai indėklai CR4017XP-0.25
XP XP
1037.jpg 1001.jpg
C4017-PR C 421L-PR
Quantity  4
Crankshaft  48.986 / 48.971
Housing  51.999 / 52.012
Max Wall  1.496
Max Length  19.271
Varikliams: 1.8 16V (C18XE, C18XEL, X18XE)
2.0 16V (20XE, C20NE, C20XE, C20LET, X20SE, X20XEV, Z20LET, Z20LEH, Z20LER)
2.2 16V (C22SEL, X22XE, X22SE, Y22SE)
59,00 EUR
Opel/Vauxhall CR4017XP 4 cilindrų švaistikliniai indėklai
Opel C20LET Z20LET King Racing švaistikliniai indėklai CR4017XP-0.5
XP XP
1037.jpg 1001.jpg
C4017-PR C 421L-PR
Quantity  4
Crankshaft  48.986 / 48.971
Housing  51.999 / 52.012
Max Wall  1.496
Max Length  19.271
Varikliams: 1.8 16V (C18XE, C18XEL, X18XE)
2.0 16V (20XE, C20NE, C20XE, C20LET, X20SE, X20XEV, Z20LET, Z20LEH, Z20LER)
2.2 16V (C22SEL, X22XE, X22SE, Y22SE)
59,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

12,00 EUR