Populiariausios prekės

Bosch injector EV14 12 Ohm 1200cc/3bar O-O 34mm

99,00 EUR

Bosch injector EV14 12 Ohm 1400cc/3bar Uscar EV6 O-O 34mm

109,00 EUR

Bosch LSU 4.2 5-ių laidų wideband O2 lambda zondas

Bosch LSU4.2 5-wire, wideband O2 sensor.
Replacement sensor for all wideband controllers.

119,00 EUR

Bosch LSU 4.9 5-ių laidų kuro/oro santykio O2 jutiklis

Prekės kodas 3888
Innovate (Bosch) LSU 4.9 5-ių laidų kuro/oro santykio O2 daviklis

119,00 EUR

Bosch purkštukas 1000cc/3bar 0280158040

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

79,00 EUR

Bosch purkštukas 1700cc/3bar 0280158827

Specifications:
Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85

80,00 EUR

Bosch Purkštukas 2200cc/3bar 0280158821

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

100,00 EUR

Bosch purkštukas 2200cc/3bar 0280158829

80,00 EUR

Bosch purkštukas 550cc/3bar 0280158117

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

59,00 EUR

Bosch purkštukas EV14 1500cc 8.5 Ohm short O-O 34mm 0280158333

155,00 EUR

Bottom adapter for EV14 injectors

12,00 EUR

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series alkūninio veleno indėklai...

299,00 EUR

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series alkūninio veleno indėklai...

299,00 EUR

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series švaistikliniai indėklai 8B663H-STD

125,00 EUR

Cometic BMW / Mini 1.6 16V Tritec W11B16 99-06' MLS cilindrų galvos tarpinė...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

130,00 EUR

Cometic BMW 1.8 1.9 M42 M44 MLS cilindrų galvos tarpinė 86x1.3mm C4349-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

199,00 EUR

Cometic BMW 1.8 1.9 M42 M44 MLS cilindrų galvos tarpinė 86x1.9mm C4349-075

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

245,00 EUR

Cometic BMW 1.8 1.9 M42 M44 MLS cilindrų galvos tarpinė 86x3mm C4349-120

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

299,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x1.14mm C4352-045

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

239,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x1.3mm C4352-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

239,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x1.8mm C4352-070

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

299,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x2.5mm C4352-098

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

325,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x2mm C4352-080

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

325,00 EUR

Cometic BMW 3.0 N54 2008-16 MLX cilindrų galvos tarpinė 85x1.1mm C15257-044

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

249,00 EUR