Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Opel / Vauxhall

ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.
16,00 EUR
Opel 2.8 Z28NEL Z28NET ACL Race Series švaistikliniai indėklai 6B2270H-STD
Specifications

Sizes STD, .025, .25
Oil Clearance Standard
Half Type Identical Halves
Material Tri-metal Hardened steel backs
Min. Std Shaft Size 2.204in / 55.992mm
Max. Std Shaft Size 2.205in / 56.008mm
Min. Std Tunnel Size 2.347in / 59.620mm
Max. Std Tunnel Size 2.348in / 59.636mm
Max Wall at Crown 0.0708in / 1.798mm
Max Overall Length 0.7303in / 18.55mm
149,00 EUR
Opel 2.8 Z28NEL Z28NET ACL Race Series švaistikliniai indėklai 6B2270H-0.25
Specifications

Sizes STD, .025, .25
Oil Clearance Standard
Half Type Identical Halves
Material Tri-metal Hardened steel backs
Min. Std Shaft Size 2.204in / 55.992mm
Max. Std Shaft Size 2.205in / 56.008mm
Min. Std Tunnel Size 2.347in / 59.620mm
Max. Std Tunnel Size 2.348in / 59.636mm
Max Wall at Crown 0.0708in / 1.798mm
Max Overall Length 0.7303in / 18.55mm
149,00 EUR
Opel 2.8 Z28NEL Z28NET ACL Race Series pagrindiniai indėklai 4M2273H-STD
Specifications

Sizes STD, .025, .25
Oil Clearance Standard
Half Type Upper & Lower
Material Tri-Metal
Min. Std Shaft Size 2.6769in / 67.992mm
Max. Std Shaft Size 2.6775in / 68.008mm
Min. Std Tunnel Size 2.8687in / 72.866mm
Max. Std Tunnel Size 2.8694in / 72.882mm
Max Wall at Crown 0.0954in / 2.422mm
Max Overall Length 0.7776in / 19.75mm   (2273H/HX) 0.9563in / 24.29mm   (2274H/HX -3 Piece Flange)
299,00 EUR
1 2