Jūsų krepšelis yra tuščias
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
Engines Audi 2.2 2.3 20V (incl. Turbo) S2, RS2, 200, S4, S6. 3B, 7A, AAN, ADU, ABY.
Modelis: FCPPB845090M50
Gamintojas: FCP Engineering
FCP stūmokliai gaminami iš sustiprinto 4032-T6 lydinio (su papildomais Cu, Ni ir Mg), kuris turi mažą šiluminį plėtimąsi, yra itin atsparus dėvėjimuisi ir didesniems šilumos kiekiams. Stūmoklio sijonai dengti molibdenu.
Komplekte yra stūmoklių žiedai ir HD serijos pirštai.
Stūmoklio diametras: 84.50mm
Suspaudimo laipsnis (CR): 9.0:1
Kompresinis aukštis: 32.50mm
Piršto diametras: 22mm
Stūmoklio eiga: 84.00mm
BMW 328 528 Turbo (M50B28, M52B28)
Švaistiklio ilgis turi būti 135mm
Šie stūmokliai skirti BMW 2.8 stroker varikliui M50B25 su M52B28 alkūniniu velenu!
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1956H |
4B1956HX |
|
| Sizes | STD, 025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7709in / 44.98mm |
|
| Max Std Shaft Size |
1.7717in / 45mm |
|
| Min Std Tunnel Size |
1.8898in / 48mm |
|
| Max Std Tunnel Size |
1.8906in / 48.02mm |
|
| Max Wall at Crown |
0.0592in / 1.504mm |
0.0587in /1.491 mm |
| Max Overall Length |
0.7283in / 18.5mm |
|
| Notes | ||
|
Diagram |
 |
|
|
Product detailed specification |
|
|
Model number |
VWIVN-1014 |
|
Head diameter |
40.00mm |
|
Stem diameter |
6.97mm |
|
Length |
91.60mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
VW / Audi - 1.8-2.0 8V |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Model number |
HEVI-1006F |
|
Head diameter |
30.00mm |
|
Stem diameter |
5.45mm |
|
Length |
106.45mm |
|
Material |
Inconel |
|
Fits for |
Honda H22A / H22A4 |
