Subaru

Subaru BRZ FA20 / Toyota 4U-GSE ACL švaistikliniai indėklai 4B8310H-0.25

Sizes	STD, .025, .25
Oil Clearance
Half Type
Material	F781
Min. Std Shaft Size	49.976
Max. Std Shaft Size	50.000
Min. Std Tunnel Size	53.000
Max. Std Tunnel Size	53.024
Max Wall at Crown	1,504
Max Overall Length	15,6
Weight	0.133
Notes

79,00 EUR

Subaru BRZ FA20 / Toyota 4U-GSE ACL pagrindiniai indėklai 5M8312H

Sizes	STD, .025, .25, .50
Oil Clearance
Half Type	Identical halves
Material	F780
Min. Std Shaft Size	2.6766in /67.985mm
Max. Std Shaft Size	2.6775in /68.009mm
Min. Std Tunnel Size	2.874in /73mm
Max. Std Tunnel Size	2.8746in /73.016mm
Max Wall at Crown	0.0986in /2.505mm
Max Overall Length	0.6929in /17.6mm
Weight	0
Notes

129,00 EUR

Subaru BRZ FA20 / Toyota 4U-GSE ACL pagrindiniai indėklai 5M8312H-0.25

129,00 EUR

Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml (1 vnt.)

18,00 EUR

Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 120000417001

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

18,00 EUR

ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 EUR

ACL Race Series Subaru EJ20 / EJ22 / EJ25 tepalo siurblys OPSB1478HP

ACL RACE Series performance oil pumps and passenger car oil pumps assure constant and
uninterrupted flow throughout the engine’s circulatory system, ensuring the lubrication
system does not miss a beat. ACL RACE Series oil pumps are designed with high output
and high volume capabilities featuring gerotor sets that are precision machined from steel
copper alloy material. Fine tolerances ensure optimum pressure and flow.
Performance Oil Pump features:
• Increased flow and pressure characteristics
• Individually inspected and tested to assure pressure and flow characteristics

RPM	Litres/Min	Gal/Min	Hi Volume Litres/Min	Hi Volume Gal/Min
600	4,9	1,29	8,5	2,25
3000	16,8	4,44	28,8	7,61
5000	41,3	10,91	51,2	13,53

299,00 EUR

ACL indėklų tarpelio matavimo juostelių rinkinys AR-1 (Raudonos sp.)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 EUR