Dalys pagal variklį

Cometic BMW M50B25 M52B28 '92-00 MLS cilindrų galvos tarpinė 85x3mm C4328-120

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

369,00 EUR

Mitsubishi 4G63T 4G64 (6 bolt) 83-92' ACL Race Series alkūninio veleno...

155,00 EUR

DART 2JZ Iron Eagle Cast Cylinder Block

FEATURES

Siamese cylinder bores with extra thick walls -- 88mm max bore size
Billet steel 4 bolt main caps 1-6, 12mm/10mm main studs standard
Extra thick outer block case, for increased strength under high HP levels
Extra thick decks ensure reliable head gasket seal -- .750" additional deck thickness
Scalloped water jackets increase flow around cylinders for better cooling
Machined for screw-in style freeze plugs
Revised oil passage location, for better flow and clearance with 94mm stroke
Machined for piston oilers
Can be machined for clearance for 94mm stroke w/ aluminum rods
All OE bolt holes for starter, water pump, etc
Blind head bolt holes available in 11mm standard or 1/2" upgrade
Parts kit included

SPECS

Material: 220 BHN Cast Iron
Deck Heights: 8.625"
Mains: 2.5992"
Cylinder Bores: 86mm (88mm Max)
Main Bearings: Stock
Main Caps: Billet Steel 4-bolt 1-6
Freeze Plugs: Screw-In
Rear Seal: Stock

4 999,00 EUR

SACHS Performance sankabos diskas 240mm 881864999526

Diametras: 240mm
Dantų skaičius: 23
Centro duomenys: 21.9x24.3-23N
Sukimo momentas: 520Nm

Originalūs kodai:

Audi
050 141 117 E
074 141 117 G
074 141 117 H
077 141 117 L
078 141 117

VW
050 141 117 E
074 141 117 G
074 141 117 H
078 141 117

Šis Sachs sankabos diskas yra alternatyva originaliam sankabos diskui bei turi daug agresyvesnį trinties paviršių, kuris leidžia suvaldyti iki 80% didesnį sukimo momentą. Dėl to jis idealiai tinka sportiniams automobiliams, kur reikalinga agresyvesnė sankaba.
Norint, kad Sachs sankabos diskas savo darbą atliktų maksimaliai, jis turi būti naudojamas su Sachs Performance diskatoriumi.

329,00 EUR

Cometic VAG 2.0L EA888 '12+ MLS cilindrų galvos tarpinė 84x1.68mm C4979-066

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

169,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x1.14mm C4352-045

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

239,00 EUR

Mitsubishi 4G63T 4G64 ACL Race Calico pagrindiniai indėklai 5M1219HC-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.2435in / 56.985mm
Max. Std Shaft Size	2.2441in / 57.000mm
Min. Std Tunnel Size	2.4016in / 61.000mm
Max. Std Tunnel Size	2.4024in / 61.021mm
Max Wall at Crown	0.0783in / 1.990mm
Max Overall Length	0.8268in / 21.00mm
Notes	For engines equipped with thrust washers

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

199,00 EUR

Billet Oil Pump Gears Toyota 2JZGTE / 2JZGE

599,00 EUR

Audi 200 S2 S4 RS2 2.2 20V FCP FCP H-profilio kaltiniai švaistikliai 164mm

Detali informacija

Gamintojas: FCP Engineering
Modelis: FCPRHA16450622-5
Profilis: H
Ilgis tarp centrų: 164mm
Didžiosios skylės diametras: 50.6mm
Piršto diametras: 22mm
Kiekis: 5 vnt., 10 vnt. ARP2000 varžtų
Pagaminta iš: kaltinio plieno 4340 EN24er
Rekomenduojama maksimali variklio galia: 800AG (5 cilindrams)
Maksimalūs variklio sūkiai: 9000RPM
Audi Quattro 200, S2, RS2, S4, S6 - 2.2 20V

Variklio konfigūracija: 2.5tdi 236mm blokas su 86.4 (OEM) velenu ir 2.2 20V stroker stūmokliais

539,00 EUR

Cometic VAG 2.0 TSI EA888 '12+ MLS cilindrų galvos tarpinė 84x1.78mm C4979-070

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

169,00 EUR

Cometic BMW 2.5 2.8 3.0 M54 MLS cilindrų galvos tarpinė 85x2.5mm C4352-098

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

325,00 EUR

Mitsubishi EVO 4-9 2.0 16V 4G63 Mahle stūmokliai 85.5mm CR 9 930130066

Product detailed specification
Bore size	85.50mm
Stroke	88.00mm
Mahle compression ratio (CR)	9.0:1
OEM compression ratio (CR)	8.3:1
Dome volume (CC)	-10cm³
Compression height (CH)	34.70mm
Pin diameter	22mm
Features	4032 alloy
Fits for	Mitsubishi EVO 8-9 - 2.0 16V (4G63)

799,00 EUR