• TYPE: 3 port solenoid
• 5.4W, 25.4ohm coil
• Simple 2 wire connection
• Full vacuum to 120psi capable
• Pulse width modulation (PWM) driven
• Numbered port connections (1 to 3)
• Suitable for most turbo and supercharged applications
• Compatible / used by most aftermarket ECU application
  

LM-2 (3837): Complete Lambda Cable Kit (8 ft.)

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-wining digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

Key features:

• Patented “Direct Digital” Wideband Technology
• Wideband O2 Compatible with ALL fuel types
• Single or Dual Channel A/F Version Available
• OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
• Log directly to SD card
• Playback log data on screen and/or with powerful LogWorks software (included)
• Large high-contrast graphics LCD
• Built-in RPM converter (direct frequency or with optional inductive clamp)
• 4 fully-differential analog inputs
• 2 configurable linear analog outputs
• Positive lock connectors for all connections
• Innovate MTS serial IN and OUT
• USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user.

LC-2 (3877): Complete Lambda Cable Kit (8 ft.)

Includes:

LC-2 Controller, Bosch Wideband O² Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), 1" Mild-Steel Exhaust Bung, *Program Cable, & Manual.

Key features:

• Patented DirectDigital™ Wideband Technology
• Wideband O² Compatible with ALL fuel types
• Ability to calibrate O² sensor for maximum accuracy
• Integrated dual-color status LED (Green/Red)
• *Two configurable linear 0-5v analog outputs
• Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft
• Positive lock connectors for all connections
• Innovate MTS serial in/out
• Serial connection to your PC
• Real-time display data on screen and/or with powerful LogWorks software

The evolution of the world’s most popular stand alone digital O² sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology.

The LC-2 utilizes the only 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges.

The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS).

KEY FEATURES

• Change from EGT to CHT range. CHT range allows greater resolution
• Display in either degF or degC
• Change exterior LED as a fill bar or light a single indicating LED
• Program EGT Warning
• Program exterior LED ranges vs Color

KIT INCLUDES:

• Gauge (Black Faceplate, Black Bezel)
• Silver Bezel & White Faceplate
• Program Cable (Serial)
• EGT K-Type Probe (Stainless Steel)
• EGT Mounting Hardware with Bung
• Quick Start Installation Guide (Full manual on CD)
• Software CD (LogWorks & LM Programmer)

Innovate MTX-L (3918): Complete All-In-One Air/Fuel Ratio Gauge Kit

Includes:
Gauge, Silver Bezel, Black Bezel, White Faceplate, Black Faceplate, Bosch Wideband O2 Sensor (LSU4.9), 8 Ft. Sensor Cable (Overall length 10 ft.), Exhaust Bung, Program Cable (Only needed for Datalogging and to change the Fuel Type Setting), and Manual.

Key features:
• The only 100% digital wideband air/fuel ratio technology!
• Water Resistant 52mm (2 1/16”) round dash-mountable casing is perfect for automotive, powersports, marine, and demanding racing applications
• Built-in Direct Digital™ Wideband Controller reduces wiring and simplifies installation (No LC-1 required)
• Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)
• Ability to calibrate O2 sensor for increased accuracy
• (2) 0-5v fully programmable linear analog outputs for use with engine management systems “closed-loop” and external dataloggers
• Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
• Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display
• Datalog using LogWorks on your PC
• Serial IN and OUT ports allows for easy connection with other Innovate MTS and other devices

PL-1: Pocket Logger, Innovate MTS Datalogger
The PL-1 is the latest in Innovate Motorsports’ line-up of products to allow for easy data logging of your MTS (Modular Tuning System) compatible product. Whether you have an LC-1 & SSI-4, MTX gauges, or any other combination of Innovate Motorsports MTS devices, the PL-1 integrates seamlessly to record all the data from the connected devices.

Key features:
Record up to 32-channels of Innovate MTS compatible devices
Sample rate of 12 times per second
Log directly to SD card (included) 2GB SD = 580 hours of recording!
Playback log data with powerful LogWorks software (available for download)
Positive lock connectors for all connections
Innovate MTS serial IN
Trigger recording on PL-1 and/or with "optional" remote push button

 Specifications:

Complete kit includes:
PL-1, Pocket Logger
2GB SD Memory Card
SD Memory Card Reader, USB to PC
Power Cable, 12v
LogWorks 3.0 Software, available for download (CD not included)
MTS Patch Cable, Locking 4-pin to 4-pin, for newer devices like the MTX gauges
MTS Patch Cable, 2.5mm to 4-pin, needed for LC-1, SSI-4, TC-4, & LMA-3