Jūsų krepšelis yra tuščias
COMETIC StreetPro Kits cater to the budget-minded street-rodder who is looking to purchase a kit with all necessary gaskets and seals needed for their rebuild. StreetPro gasket kits are sold as a top-end kits and bottom-end kits. Purchase both top- and bottom-end kits for a total engine rebuild. Quality gasket materials are a priority in StreetPro kits. Kit materials include: MLS, AFM, Aramid Fiber, and Armor Clad.
•Bosch LSU 4.9 support (ADV version also available)
•Operating voltage range: 9 -16V
•Current consumption: up to 3A (during warm up)
•IP65 enclosure
•2 programmable analog outputs 0-5V
•Communication and setup: CAN 2.0A/B
|
Tarpinės kodo pradžia 338 |
|
|
Athena privalumai |
|
| Optimizuota reljefinė forma |
Apvali įspaudo forma padidina cilindrų, tepimo |
| Pažangi "stopper" technologija |
Ši technologija pagerina slėgio sandarinimą aplink cilindrą. Aukščiausios sandarinimo savybės didelės galios varikliams |
|
Padengimo technologija |
Athena sukurta speciali plieninių paviršių danga pagerina tarpinės patikimumą ir atsparumą temperatūrai |
|
Product detailed specification |
|
|
Bore size |
83.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-8.4cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
23mm |
|
Features |
Accepts Turbo and Nitrous; FSR coated piston skirt |
|
Fits for |
VW / Audi - 2.0 TSI chain driven engines EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
| Beryllium (Be) | 0% |
| Main Body | High temp 347 SS |
| Diaphragm | Proprietary Silicone w/ nomex |
| Actuator Housing | 6061 T6 anodised Al. |
| Valve Guide | Nitronic 60 |
| Valve | EV8 w/ proprietary plating |
| V-Band | Heat treated 431 SS w/ 18-8 nut |
| Weld Flanges | 304 Stainless Steel |
| Springs | 17-7PH Stainless Steel |
| Position | |||||||
|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
||||||
| Quantity | 1 | ||||||
| Crankshaft | 66.965 / 66.972 | ||||||
| Housing | 0.000 / 0.000 | ||||||
| Max Wall | 2.510 | ||||||
| Max Length | 18.352 |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B7820H |
4B7820HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8898 in / 48.000 mm |
|
| Max Std Shaft Size | 1.8905 in / 48.020 mm | |
| Min Std Tunnel Size | 2.0310 in / 51.587 mm | |
| Max Std Tunnel Size | 2.0315 in / 51.600 mm | |
| Max Wall at Crown | 0.0696 in / 1.768 mm | 0.0691 in / 1.755 mm |
| Max Overall Length |
0.807 in / 20.50 mm |
|
| Notes | ||
|
Diagram |
 |
|
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.999 / 51.981 | ||||||
| Housing | 55.024 / 55.042 | ||||||
| Max Wall | 1.506 | ||||||
| Max Length | 19.200 |
|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
-15cm3 |
|
Compression height (CH) |
29.59mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; coated FSR series skirt |
|
Fits for |
VW - 2.0 16V 9A |
