Jūsų krepšelis yra tuščias
Modelis: FCPPB845085M50
Gamintojas: FCP Engineering
FCP stūmokliai gaminami iš sustiprinto 4032-T6 lydinio (su papildomais Cu, Ni ir Mg), kuris turi mažą šiluminį plėtimąsi, yra itin atsparus dėvėjimuisi ir didesniems šilumos kiekiams. Stūmoklio sijonai dengti molibdenu.
Komplekte yra stūmoklių žiedai ir HD serijos pirštai.
Stūmoklio diametras: 84.50mm
Suspaudimo laipsnis (CR): 8.5:1
Kompresinis aukštis: 32.50mm
Piršto diametras: 22mm
Stūmoklio eiga: 75.00mm
BMW 325 525 Turbo (M50B25, M52B25TU)
Švaistiklio ilgis turi būti 140mm
| NGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
Engines Audi 2.2 2.3 20V (incl. Turbo) S2, RS2, 200, S4, S6. 3B, 7A, AAN, ADU, ABY
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
85.00mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
10.8:1 |
|
Compression height (CH) |
30.40mm |
|
Pin diameter |
21mm |
|
Fits for |
Opel 3.0 24V (X30XE) |
